Janome Even Feed (Walking) Foot Low Shank(5-7mm
The 7mm Walking (Even Feed) Foot is the perfect tool for quilting.
The even feed foot, sometimes referred to as the walking foot, is designed with a set of feed dogs (teeth) which allow the fabric to feed without shifting and eliminates the problem of the under layer of fabric coming up short. The even feed foot is also great for topstitching which can be spoilt due to irregularity of stitching. This is often caused by the bulk created with the seam allowance especially around collars and reveres. Using the walking foot for topstitching will eliminate this problem and give perfect stitching every time. Also includes quilting guide.
A ‘walking’ foot for your sewing machine is essential if you are a quilter.
The 7mm Walking Foot will fit the following low shank sewing machine models:
Janome: 6019QC, 6025QC, 6260QC, CS995, DC2050, DC2150, DC2101, DC2101LE, DC2200, DC3050, DC3100, DC3200, DC4030, DC6030, DC6050, DC6100, DC7060, DC7100, DM7200, 2160DC, 3160QDC, 4120QDC, 4300QDC, 5300QDC, MC3000, MC3500, MC4000, MC4800, MC4800QC, MC4900QC, MC5200, MC5500, MC6000, MC6500P, MS5027LE, MW3018 (My Excel 18W), MW3018LE, Sewist 625E, 4618, 4618QC, 5027, 5124, ME4014, ME4015, ME4018, ME4123, MS2028, MS2522, MX3123, SD2014, Sewist 740DC/780DC, SR2000, SS2015, SW2018, 995CS, 49360
Janome: 6019QC, 6025QC, 6260QC, CS995, DC2050, DC2150, DC2101, DC2101LE, DC2200, DC3050, DC3100, DC3200, DC4030, DC6030, DC6050, DC6100, DC7060, DC7100, DM7200, 2160DC, 3160QDC, 4120QDC, 4300QDC, 5300QDC, MC3000, MC3500, MC4000, MC4800, MC4800QC, MC4900QC, MC5200, MC5500, MC6000, MC6500P, MS5027LE, MW3018 (My Excel 18W), MW3018LE, Sewist 625E, 4618, 4618QC, 5027, 5124, ME4014, ME4015, ME4018, ME4123, MS2028, MS2522, MX3123, SD2014, Sewist 740DC/780DC, SR2000, SS2015, SW2018, 995CS, 49360